35KV 630A Deadbreak T Rear Connector from China Suppliers - High-Quality Factory Product for Reliable Power Distribution
35KV 630A European after connector. General 630A European after connector can be use together with the T Fore connector and some other back connector, it can be provide more branches, and they can not together with the bushing directly, cover the back protection cap on the end of the blanking cover.
Key Features
Scope of Delivery
- 630A European after connector
- Adaptor
- Conductor cable lug
- Connect lug
- Two head screw
- Silicone Lubricant
- Clearing Paper
- Installation Instruction Sheet
- Quality Certificate
Technical Specifications
| Reference No. | Conductor cross section (mm²) | Stretch range over insulation (mm) | Cable type | Size of stress cone |
|---|---|---|---|---|
| DR HTT-35/630-50 | 50 | 31 | 26/35 | A |
| DR HTT-35/630-70 | 70 | 32.6 | 26/35 | B |
| DR HTT-35/630-95 | 95 | 34.2 | 26/35 | C |
| DR HTT-35/630-120 | 120 | 35.6 | 26/35 | C |
| DR HTT-35/630-150 | 150 | 37.2 | 26/35 | D |
| DR HTT-35/630-185 | 185 | 38.7 | 26/35 | E |
| DR HTT-35/630-240 | 240 | 41.1 | 26/35 | F |
| DR HTT-35/630-300 | 300 | 43.2 | 26/35 | G |
| DR HTT-35/630-400 | 400 | 46.4 | 26/35 | H |
| DR HTT-35/630-500 | 500 | 49.2 | 26/35 | I |
| DR HTT-35/630-630 | 630 | 52.5 | 26/35 | I |
Frequently Asked Questions
Can the 35KV 630A European after connector be connected directly to a bushing?
No, it cannot be connected together with the bushing directly. It must cover the back protection cap on the end of the blanking cover.
What components are included in the Scope of Delivery?
The standard delivery includes the 630A European after connector, Adaptor, Conductor cable lug, Connect lug, Two head screw, Silicone Lubricant, Clearing Paper, Installation Instruction Sheet, and a Quality Certificate.
What is the purpose of the built-in capacitive test point?
The built-in capacitive test point is used to determine the circuit status or to install a fault indicator.
Can this connector be installed at different angles?
Yes, the mounting orientation is flexible. It can be installed vertically, horizontally, or at any angle in between.
How does the connector perform in terms of environmental protection?
It provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.
Are there minimum phase clearance requirements for installation?
No, there are no minimum phase clearance requirements for installing this connector.