15KV 630A Deadbreak T Rear Connector - Premium Quality from China Suppliers and Factory
15KV 630A European After Connector
The General 630A European after connector can be used together with the T Fore connector and some other back connectors to provide additional branches. Please note that they cannot be connected directly with the bushing. Ensure to cover the back protection cap on the end of the blanking cover.
Key Features
Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.
Built-in capacitive test point helps easily determine the circuit status or install a fault indicator.
No minimum phase clearance requirements, allowing flexible and compact installations.
Versatile mounting options: can be installed vertically, horizontally, or at any angle in between.
Technical Specifications
| Reference No. | Conductor cross section (mm²) | Stretch range over insulation (mm) | Cable Type | Size of stress cone |
|---|---|---|---|---|
| DR JBK-15/630-25 | 25 | 16.6 | 8.7/15 | A |
| DR JBK-15/630-35 | 35 | 17.6 | 8.7/15 | A |
| DR JBK-15/630-50 | 50 | 19 | 8.7/15 | A |
| DR JBK-15/630-70 | 70 | 20.6 | 8.7/15 | B |
| DR JBK-15/630-95 | 95 | 22.2 | 8.7/15 | B |
| DR JBK-15/630-120 | 120 | 23.6 | 8.7/15 | C |
| DR JBK-15/630-150 | 150 | 25.2 | 8.7/15 | C |
| DR JBK-15/630-185 | 185 | 26.7 | 8.7/15 | D |
| DR JBK-15/630-240 | 240 | 29 | 8.7/15 | D |
| DR JBK-15/630-300 | 300 | 31.2 | 8.7/15 | E |
| DR JBK-15/630-400 | 400 | 34.4 | 8.7/15 | E |
| DR JBK-15/630-500 | 500 | 37.2 | 8.7/15 | F |
| DR JBK-15/630-630 | 630 | 40.5 | 8.7/15 | G |
Product Structure
- Two head screw
- Insulation
- Insulating plug
- Semi-conductive insert
- Stress relief
- Grounding eye
- Semi-conductive shield
- Conductor cable lug
Scope of Delivery
- 630A European after connector
- Adaptor
- Conductor cable lug
- Connect lug
- Two head screw
- Silicone Lubricant
- Clearing Paper
- Installation Instruction Sheet
- Quality Certificate
Frequently Asked Questions
What is the primary function of the 15KV 630A European after connector?
It is designed to work in combination with the T Fore connector and other back connectors to establish additional cable branches. It cannot be connected directly with the bushing.
Does this connector support submersed operations?
Yes. When properly mated with a suitable bushing or plug, it provides a fully screened and fully submersible separable connection.
What is the purpose of the built-in capacitive test point?
The built-in capacitive test point allows operators to easily determine the current circuit status or install a fault indicator directly.
Are there any specific angle requirements for installation?
No, mounting is highly flexible. It can be installed vertically, horizontally, or at any angle in between.
What is included in the standard delivery package?
The package includes the 630A European after connector, adaptor, conductor cable lug, connect lug, two head screw, silicone lubricant, clearing paper, installation instruction sheet, and a quality certificate.