24KV 630A Deadbreak T Rear Connector - Quality China Suppliers & Factory for Reliable Power Connections
The 24KV 630A European after connector is designed for versatile medium voltage applications. Generally, this 630A European after connector can be used together with the T Fore connector and other back connectors to provide additional cable branches. Please note that they cannot be connected directly to the bushing; the back protection cap must cover the end of the blanking cover.
Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.
Can be used under various operating circumstances.
Built-in capacitive test point to determine the circuit status or install a fault indicator.
No minimum phase clearance requirements.
Flexible mounting options: can be installed vertically, horizontally, or at any angle in between.
| Reference No. | Conductor cross section (mm²) | Stretch range over insulation (mm) | Cable Type | Size of stress cone |
|---|---|---|---|---|
| DR HJT-24/630-35 | 35 | 18.6 | 12/20 | B |
| DR HJT-24/630-50 | 50 | 20 | 12/20 | B |
| DR HJT-24/630-70 | 70 | 21.6 | 12/20 | B |
| DR HJT-24/630-95 | 95 | 23.2 | 12/20 | C |
| DR HJT-24/630-120 | 120 | 24.6 | 12/20 | C |
| DR HJT-24/630-150 | 150 | 26.2 | 12/20 | C |
| DR HJT-24/630-185 | 185 | 27.7 | 12/20 | D |
| DR HJT-24/630-240 | 240 | 30 | 12/20 | D |
| DR HJT-24/630-300 | 300 | 32.2 | 12/20 | E |
| DR HJT-24/630-400 | 400 | 35.4 | 12/20 | E |
| DR HJT-24/630-500 | 500 | 38.2 | 12/20 | F |
| DR HJT-24/630-630 | 630 | 41.5 | 12/20 | F |
| Reference No. | Conductor cross section (mm²) | Stretch range over insulation (mm) | Cable Type | Size of stress cone |
|---|---|---|---|---|
| DR HJT-24/630-35 | 35 | 23.6 | 18/20 | B |
| DR HJT-24/630-50 | 50 | 25 | 18/20 | B |
| DR HJT-24/630-70 | 70 | 26.6 | 18/20 | B |
| DR HJT-24/630-95 | 95 | 28.2 | 18/20 | C |
| DR HJT-24/630-120 | 120 | 29.6 | 18/20 | C |
| DR HJT-24/630-150 | 150 | 31.2 | 18/20 | C |
| DR HJT-24/630-185 | 185 | 33.7 | 18/20 | D |
| DR HJT-24/630-240 | 240 | 35 | 18/20 | D |
| DR HJT-24/630-300 | 300 | 36.2 | 18/20 | E |
| DR HJT-24/630-400 | 400 | 40.4 | 18/20 | E |
| DR HJT-24/630-500 | 500 | 43.2 | 18/20 | F |
| DR HJT-24/630-630 | 630 | 46.5 | 18/20 | F |
1. What is the application of the 24KV 630A European after connector?
It is designed to be used in conjunction with T Fore connectors and other back connectors to establish additional cable branches in medium voltage electrical setups.
2. Can this after connector be connected directly to a bushing?
No, it cannot be connected directly to the bushing. The installation requires covering the back protection cap on the end of the blanking cover.
3. What mounting angles are supported during installation?
The connector offers complete installation flexibility and can be mounted vertically, horizontally, or at any angle in between.
4. Does the connector feature a test point for circuit monitoring?
Yes, it includes a built-in capacitive test point that allows users to determine the circuit status or install a fault indicator directly.
5. What cable sizes and ratings are compatible with this connector?
It is compatible with 12/20 kV and 18/20 kV cables, supporting conductor cross-sections ranging from 35 mm² up to 630 mm² depending on the specific model reference.