Common questions about the transportation and storage of solid insulated ring net boxes

The packaged ring net modules can be transported by electric forklifts or cranes. Transportation must be handled with care and actual operation must be carried out with solemnity. Do not allow the module components with solid insulation Ring Main Units to collide with strong objects, as this will damage the appearance of the Ring Main Unit modules and endanger the practical application effect of the assembled solid insulation Ring Main Units.

Solid insulation ring net module ring cages need to be equipped with hooks for hoisting during transportation. The ropes used for hoisting shall not be shorter than 2 meters. Make sure the rope is firm and reliable to prevent the ring mold from falling during the entire hoisting process, which could cause deformation and damage the hoisting appearance. Module, inauspicious, is the specific application of solid insulation cabinets;

Solid insulation ring network modules should be placed in a dry, naturally ventilated and dust-free area before on-site installation. If covered with a packaging bag cage, the bottom should be left open for natural ventilation.

4. Application and Maintenance of Solid Insulation ring net Box:

(1) Search and check before application: Before using the ring network module, for personal safety and the safety of mechanical equipment, the following searches and checks must be carried out;

(2) Check whether the main power supply circuit and the grounding device power supply circuit are correctly adjacent; (3) Check whether the interlocks of the mechanical equipment are appropriate and reliable;

(4) Check whether the load switch in the ring network module and the power switch of the grounding device are naive and appropriate in the actual high-voltage operation.

(5) Check whether the adjacency of high-voltage cables is correct and reliable.

Solid rotating ring cage with insulation

The funds for the ring mold are put into operation in accordance with the designated actual operation. Maintenance: Due to the following advantages, this machine requires no daily maintenance;

All induction charging elements are installed in epoxy resin plastic grease insulated cylinders.

⑷ Electroplating treatment shall be carried out on the actual operating mechanism components that are fully insulated with epoxy resin or plastic resin and placed outdoors; 3. The support points of the copper coupling can continue to work reasonably without lubricating fluid.